Max. capacity: 6614 lb
Max. lifting height: 20 ft 1 in
Breakout force with bucket: 5671 daN
Ground clearance: 11 in

  • Get a Quote Payment Calculator

    • Get information on the MLT 630-115 V CP (S2)

    Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.

    Loan Calculator

    Use the Loan Calculator to help you determine the financing and payment options that are best for you.

    Amount Financed ($)
    Interest Rate (%)
    Loan Term in Months
    Monthly Payment Calculated

    **The accuracy of this calculator and its applicability to your circumstances is not guaranteed. You should obtain personal advice from qualified professionals. This information is provided for illustrative purposes only and does not constitute an application. This notice does not guarantee loan approval, nor is it an offer or commitment to make a loan to you on the above terms.

MLT 630-115 V CP (S2) Specs & Compare
Download PDF
Capacities
Max. capacity6614 lb
Max. lifting height20 ft 1 in
Max. outreach11 ft 6 in
Reach at max. height2 ft 11 in
Breakout force with bucket5671 daN
Weight and dimensions
Unladen weight (with forks)14595 lb
Ground clearance11 in
Wheelbase8 ft 10 in
Overall length to carriage (with hitch)15 ft 11 in
Overall length to carriage (without hitch)15 ft 2 in
Front overhang4 ft 4 in
Overall width6 ft 9 in
Overall cab width3 ft 1 in
Overall height7 ft
Tilt-down angle133 °
Tilt-up angle14 °
External turning radius (over tyres)12 ft
Standard tiresAlliance - A580 - 400/70 R20 149A8
Drive wheels (front / rear)2 / 2
Steering wheels (front / rear)2 / 2
Performances
Lifting6.10 s
Lowering5.10 s
Extension6.30 s
Retraction5.70 s
Crowd4.10 s
Dump3.30 s
Engine
Engine brandDeutz
Engine normStage V
Engine modelTCD 3.6 L4
Number of cylinders - Capacity of cylinders4 - 221 in³
I.C. Engine power rating / Power116 Hp / 85 kW
Max. torque / Engine rotation339 ft/lbs @1600 rpm
Drawbar pull (Laden)6580 daN
Reversible fanStandard
Engine cooling system4 radiators (water + intercooler + oil + fuel)
HVO validated (according to EN 15940 standard)Yes
Transmission
Transmission typeM-Varioshift
Number of gears (forward / reverse)2 / 2
Max. travel speed (may vary according to applicable regulations)24 mph
Differential lockLimited slip differential on front axle
Parking brakeManual
Service brakeOil-Immersed multi-discs braking on front axles
Hydraulics
Hydraulic pump typeGear pump
Hydraulic flow - Pressure28 US gpm - 3626 PSI
Flow sharing distributorOption
Tank capacities
Hydraulic tank capacity25 US gal
Fuel tank21 US gal
Diesel Exhaust fluid (AdBlue® type)3 US gal
Noise and vibration
Noise at driving position (LpA) tested following NF EN 12053 norm73 dB
Vibration on hands/arms< 8 ft/s²
Miscellaneous
Tractor homologationTractor homologation
Safety cab homologationCabin ROPS - FOPS level 2
ControlsJSM
MLT 630-115 V CP (S2) Features & Benefits

Dedicated to the agricultural market, the MLT 630-115 V CP telescopic handler combines compactness and performance. It has a lift height of 6.11 m and a capacity of 3,000 kg. These features make this model perfectly adapted to work in restricted areas, either inside or outside farm buildings.

Comfort first and foremost: this model features a high-visibility grille, easy access to the driver's cab and a range of standard equipment (wide screen, JSM joystick on floating armrest, etc.).

Performance first and foremost: with a 116 hp engine, M-Varioshift transmission and 106 l/min hydraulic flow, the MLT 630-115 V CP saves you time on a daily basis. Its all-terrain capabilities, radiator cleaning system and air pre-filter make it an ideal solution for agricultural environments.

Profitability first and foremost: easy access to the machine's main components, connected machine as standard, optimized fuel consumption (Stop & Start function)... every effort has been made to actively improve your farm's profitability.

View Current Offers
Contact Us
Request Demo

Request A Demo

Fields with asterisks* are required.