• Get a Quote Payment Calculator
  • Get information on the ULM 412 H

    Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.

    Loan Calculator

    Use the Loan Calculator to help you determine the financing and payment options that are best for you.

    Amount Financed ($)
    Interest Rate (%)
    Loan Term in Months
    Monthly Payment Calculated

    **The accuracy of this calculator and its applicability to your circumstances is not guaranteed. You should obtain personal advice from qualified professionals. This information is provided for illustrative purposes only and does not constitute an application. This notice does not guarantee loan approval, nor is it an offer or commitment to make a loan to you on the above terms.

ULM 412 H Specs & Compare
Capacities
Max. capacity 2756 lb
Max. lifting height 14 ft 1 in
Max. outreach 8 ft 7 in
Reach at max. height 3 ft 3 in
Breakout force with bucket 1880 daN
Weight and dimensions
Shipping mass (min. / max.) 5622 lb / 6063 lb
Ground clearance 11 in
Wheelbase 7 ft
Overall length to carriage (with hitch) 11 ft 5 in
Overall length to carriage (without hitch) 11 ft 5 in
Front overhang 2 ft 6 in
Overall width 4 ft 11 in
Overall cab width 2 ft 2 in
Overall height 6 ft 4 in
Tilt-down angle 116 °
Tilt-up angle 23 °
External turning radius (over tyres) 8 ft 7 in
Standard tires CAMSO - MPT 552 - 10.0/75-15.3 124A8
Performances
Lifting 8.80 s
Lowering 7 s
Extension 6.40 s
Retraction 4.30 s
Crowd 3.40 s
Dump 2.60 s
Engine
Engine brand Yanmar
Engine norm Stage V / Tier 4 final
Engine model 3TNV88C-DMU
Number of cylinders - Capacity of cylinders 3 - 100 in³
I.C. Engine power rating / Power 35.10 Hp / 26.20 kW
Max. torque / Engine rotation 77 ft/lbs @1950 rpm
Drawbar pull (Laden) 2000 daN
Reversible fan Option
Engine cooling system 3 radiators (water + hydraulic oil + fuel)
HVO validated (according to EN 15940 standard) Yes
Transmission
Transmission type Hydrostatic
Number of gears (forward / reverse) 2 / 2
Max. travel speed (may vary according to applicable regulations) 16 mph
Differential lock Limited slip differential on front and rear axles
Parking brake Automatic negative parking brake
Service brake Hydraulic servo brake
Hydraulics
Hydraulic pump type Gear pump
Hydraulic flow - Pressure 13 US gpm - 3408 PSI
Flow sharing distributor Standard
Tank capacities
Fuel tank 9 US gal
Noise and vibration
Noise at driving position (LpA) tested following NF EN 12053 norm 76 dB
Noise to environment (LwA) 104 dB
Vibration on hands/arms < 2.50 m/s²
Miscellaneous
Safety cab homologation ROPS - FOPS cab (level 1)
Controls JSM
ULM 412 H Features & Benefits

The ULM telehandler is designed to help you save time and money. It is adapted to many types industries: lanscaping companies, riding schools, building companies... Thanks to its 998kg or 1202kg capacity (2 models are available), the ULM can easily place pallets of blocks or bricks, straw or hay bales... Its ultra compact dimensions and rough terrain abilities make this machine particularly adapted to work in tight spaces on all types of grounds. Due to its lightweight, the ULM can also easily be transported on a small trailer. If you need to fully adapt your machine to your environment, numerous options are available: the auto reversing fan, the air prefilter, a full range of tyres...

Request Demo

Request A Demo

Fields with asterisks* are required.